Kalpurja

Additional Information:

• Production Capacity: 100
• Delivery Time: 10 Working days
• Packaging Details: box packing

Additional Information:

• Port of Dispatch: NEW DELHI
• Delivery Time: 5

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: BOX PACKING

The Compressor Tester for Small Hermetic Compressors is a specialized diagnostic tool designed to test the electrical and mechanical performance of small hermetic compressors commonly used in refrigerators, freezers, air conditioners, water coolers, and small HVAC systems.

This tester helps determine whether a hermetic compressor is functioning properly, ensuring that components such as the motor windings, starting relays, overload protectors, and internal mechanical parts are operating within their specified performance ranges.

• Check Compressor Running Status (Start/Stop)

• Measure Starting and Running Current

• Evaluate Winding Resistance & Insulation Resistance

• Monitor Internal Mechanical Condition via Sound / Vibration

• Detect Electrical Failures (Shorts, Open Windings, Ground Faults)

• Simulate Real Working Conditions with Controlled Power Supply

• Voltage Range: 110V / 220V / 240V (Depending on model)

• Frequency: 50Hz / 60Hz

• Power Supply: AC Mains

• Ampere Range: Up to 20A (Depending on capacity)

• Control Panel:

  • Start / Stop Switch

  • Overcurrent Protection

  • Voltage and Current Display

  • Timer Control

• Sockets: Universal Compressor Connector Sockets

• Safety Features: Fuse / Circuit Breaker / Overload Protection

Additional Information:

• Delivery Time: 1WEEK

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: Box packing

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packaging

The Plastic Automatic Level Instrument is a precision optical device designed for surveying, civil engineering, and construction applications where accurate leveling and alignment are essential. This instrument is housed in a robust, lightweight plastic body, providing durability, corrosion resistance, and ease of handling in a variety of site conditions.

The automatic level features a high-precision compensator mechanism that ensures quick and accurate leveling, even on slightly unstable ground. It is widely used for leveling, height measurements, and alignment tasks in both indoor and outdoor environments.

• Material: Durable, Lightweight Plastic Housing

• Magnification: 20X / 24X / 28X (Model Specific)

• Objective Aperture: 32 mm (Typical)

• Minimum Focusing Distance: 0.5 m to 1.0 m

• Accuracy: ±1.5 mm to ±2.5 mm per km double run leveling

• Compensator: Magnetic / Wire Suspended Automatic Compensator

• Circle Reading: 360° Horizontal Circle with Fine Adjustment

• Weight: Lightweight for Easy Portability

• Color: Standard Yellow / Orange / Customized

• Civil Engineering & Construction Projects

• Road & Railway Alignment Works

• Building & Foundation Leveling

• Agricultural Land Surveying

• Landscaping & Drainage Projects

• Educational Use in ITI & Engineering Colleges

✅ Lightweight, Durable Plastic Housing for Portability
✅ Automatic Compensator for Quick, Accurate Leveling
✅ High-Precision Optics for Clear, Accurate Readings
✅ Resistant to Weather, Dust, and Site Conditions
✅ 360° Horizontal Circle for Versatile Use
✅ Ideal for Both Professional & Educational Use

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: BOX

The Stainless Steel Kalpurja Pattern Hanging Stand is a specially designed traditional utility stand commonly used in temples, homes, and cultural spaces for religious and ceremonial purposes. Crafted from premium-grade stainless steel, this stand offers durability, rust resistance, and an elegant polished finish. The Kalpurja pattern adds a decorative and auspicious element to its aesthetic appeal, making it both functional and ornamental.

This hanging stand is ideal for holding puja accessories, ritual items, or small decorative artifacts, providing a neat, organized, and elevated presentation during religious functions or daily worship.

• Material: High-Quality Stainless Steel (SS 202 / SS 304 as per requirement)

• Design: Traditional Kalpurja Pattern with Intricate Detailing

• Finish: Mirror Polished / Matte Finish (Optional)

• Mounting Type: Hanging / Hook-Based Installation

• Size: Available in Multiple Sizes or Customizable as per Requirement

• Temples (Home or Commercial)

• Religious & Cultural Institutions

• Homes for Daily Worship

• Ceremonial or Festive Decorations

• Hotels, Resorts, and Heritage Spaces

✅ Elegant Kalpurja Pattern Enhances Aesthetic Appeal
✅ Rust-Free, Durable Stainless Steel Construction
✅ Easy to Hang and Maintain
✅ Perfect for Traditional and Religious Use
✅ Available in Custom Sizes to Suit Specific Needs

Additional Information:

• Production Capacity: 25
• Delivery Time: 2 days
• Packaging Details: carton box

We are a trusted and reliable supplier of specialized tools and equipment for the ITI Solar Trade, catering to Industrial Training Institutes (ITI), Skill Development Centers, Vocational Training Institutes, and Polytechnic Colleges. Our range of tools is carefully selected to meet the latest NCVT/SCVT curriculum guidelines for the Solar Technician Trade, ensuring students receive hands-on training with industry-standard equipment.

We supply tools that cover all key aspects of solar energy systems training, including installation, maintenance, testing, and commissioning of solar photovoltaic (PV) systems. Our focus is on providing durable, precise, and easy-to-use tools that help institutions deliver practical and effective training.

✅ Solar Panel Installation Tool Kits
✅ Multimeters (Digital/Analog)
✅ Solar Power Meters (Irradiance Meters)
✅ Clamp Meters / Tong Testers
✅ MC4 Connector Tools / Crimping Tools
✅ Cable Cutters & Strippers
✅ Earthing Testers / Insulation Testers
✅ Solar Charge Controllers (Demo Models)
✅ Inverter Testing Panels (AC/DC)
✅ Safety Kits (Gloves, Helmets, Insulated Mats)
✅ Solar Panel Tilt Angle Measuring Tools
✅ Solar PV Training Panels / Boards

• ITI Solar Technician Trade Workshops

• Skill Development Programs (Solar Energy)

• Polytechnic Colleges (Renewable Energy Labs)

• Vocational Education Training (VET)

• Renewable Energy Training Institutions

Additional Information:

• Production Capacity: 10
• Delivery Time: 10 days
• Packaging Details: BOX PACKING

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packaging

Kalpurja is a highly reputed authorized dealer and stockist of superior quality of Electrical Electronic Test & Measuring Instruments, Electrical & Electronic Equipments and Educational Electrical Electronic Lab Training instruments. Stockist and authorized dealer of all industrial engineers products at wholesale prices. Our company is committed to offer quality products, which are manufactured with the application of latest technology and modern machines to ensure the customer satisfaction.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: wooden packing

• Hydraulic power pack
• Pressure Releive Valve
• Dript Tray, Steel
• Pressure Gauge
• Four Way distributor
• Double acting hydraulic cylinder
• Suitable weight
• Mounting kit for weight
• 3/2 way directional control valve
• 4/2 way directional control valve
• 4/3 way directional control valve
• Non return valve
• Pilot operated check valve
• One way flow control valve
• T connector with self sealing couling nipples (2 Nos.) and qick coupling socket (1 No.)
• Profile Plate

• Single Acting cycliner
• Double acting Cylinder
• 3/2 Way valve
• 3/2 way valve
• One way flow control valve
• 5/2 way vlave
• 5/2 way pneumatic actuated valve
• 3/2 way roller lever valve
•  Shuttle valve 
•  Two pressure valve 
•  Pressure guage
• Manifold with self closing
• Pushbutton station for electrical signals
• Relay Station
• 3/2 way single solenoid valve
•  5/2 way single solenoid valve
• 5/2 way double solenoid valve
• Power Supply Unit
• Profile plate, Anodised Aluminium

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: BOX PACKAGING

The 5V DC Three Phase Automatic Solar System is an advanced and efficient solution designed to harness solar energy for DC-powered applications requiring three-phase output at low voltage (5V DC). This system integrates solar panels, a high-efficiency MPPT charge controller, advanced DC-to-DC converters, and intelligent automatic control features to ensure reliable, stable, and continuous power supply, even under varying environmental conditions.

Ideal for industrial automation systems, precision electronics, remote monitoring equipment, and low-voltage three-phase control devices, this solar solution provides clean, renewable, and maintenance-free power for applications where grid connectivity is limited or unreliable.

• Input: Solar PV Panels (As per site requirement)

• Output Voltage: 5V DC Three Phase

• Rated Output Current: As per application (customizable)

• Control System: Fully Automatic with Auto Start/Stop

• Charge Controller: MPPT Technology for Maximum Efficiency

• Inverter Type: High-Efficiency DC-to-DC Three Phase Converter

• Battery Backup (Optional): Lithium / Lead-Acid / LFP, Optional for 24/7 Operation

• Protection Features: Overload, Short Circuit, Reverse Polarity, Surge

• Precision Electronic Control Systems

• Remote Automation Equipment

• Scientific Instruments

• Telecom and Data Systems

• Industrial IoT Installations

• Small-Scale Industrial DC Motors or Actuators

• Specialized Laboratory Equipment

Additional Information:

• Production Capacity: 1HP
• Delivery Time: 2

Compression Set Apparatus, commonly used in rubber and polymer testing laboratories to measure the compression set of elastomeric materials. This test determines the ability of a material (typically rubber or soft polymers) to retain its elastic properties after prolonged compressive stresses at a given temperature and time.

The Compression Set Apparatus measures how much a rubber or elastomer sample fails to return to its original thickness after being compressed under specified conditions of time, temperature, and load. It provides critical data about the permanent deformation of materials used in seals, gaskets, and cushioning components.

1. A rubber specimen of known thickness is placed between two rigid compression plates.

2. A precise compressive force is applied using the threaded screw mechanism and locked into position.

3. The assembly is then placed in a controlled environment (usually an oven) for a specified period and temperature.

4. After cooling, the final thickness is measured and compared to the original.

5. The compression set (%) is calculated based on the loss of thickness.

 Top Screw with Handle – Applies the compressive force uniformly.
Compression Plates – Precisely machined to ensure parallel compression surfaces.
Guide Rods – Ensure alignment and stability during compression.
 Springs – Help maintain or release the compression after testing.
 Base Plate – Provides structural stability.

Features:

•Sturdine

•Require less maintenance

•Durability

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packaging

A Descaling Pump Set is a specialized equipment designed for the removal of limescale, rust, and mineral deposits from the internal surfaces of heat exchangers, condensers, cooling towers, boilers, pipelines, and other industrial equipment where scale formation affects efficiency and performance. The pump circulates descaling chemicals or cleaning solutions through the system, breaking down and flushing out accumulated deposits without the need for dismantling the equipment.

Descaling pump sets are widely used in industries such as HVAC, power plants, chemical processing, food processing, refineries, and maintenance services to ensure optimal heat transfer efficiency and reduce energy costs.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packing

A TV pattern generator is a device used to generate test patterns and signals that can be displayed on a television or monitor. It's commonly used in television repair, calibration, and testing scenarios. Here's a detailed tabular specification for a TV pattern generator:

The ITI Hanging Dress Stand is a sturdy and practical solution for organizing and displaying industrial uniforms, lab coats, aprons, or training attire in industrial training institutes (ITI), workshops, schools, colleges, and industrial environments. Constructed from heavy-duty metal or stainless steel, this dress stand offers durability, stability, and long-term performance in high-use areas.

Ideal for keeping uniforms and workwear neat, wrinkle-free, and easily accessible, this hanging stand is a functional addition to dressing rooms, training facilities, and industrial workspaces.

• Material: Heavy-Duty Mild Steel / Stainless Steel (As per requirement)

• Finish: Powder-Coated / Chrome-Plated / SS Polished

• Structure: Robust Frame with Hanging Rod

• Base: Stable, Anti-Skid Design for Safety

• Size: Standard & Custom Sizes Available

• Mobility: Optional Wheels / Fixed Base

Additional Information:

• Production Capacity: 25
• Delivery Time: 2
• Packaging Details: box packing

We are a leading supplier of Mannequins specially designed for ITI Fashion Design Technology departments, vocational training institutes, and fashion design colleges. Our range includes Male, Female, and Kid mannequins, ideal for practical training in garment fitting, draping, tailoring, and fashion designing courses.

These mannequins help students gain real-time skills in pattern making, fabric draping, garment construction, and visual merchandising, providing a professional experience aligned with industry standards.

✅ Male Mannequin (Full Body / Half Body)
✅ Female Mannequin (Full Body / Half Body)
✅ Kid Mannequin (Toddler / Child Sizes)
✅ Display Dress Forms (Adjustable & Fixed Size Options)

• Material: High-quality Fiber / Plastic / Polyurethane

• Finish: Glossy / Matte / Skin Tone / White / Black

• Mounting: Sturdy Metal / Wooden Base with Adjustable Height

• Posture Options: Standing, Headless, or With Head

• Sizes: As per standard industry dimensions (Adult & Child)

✅ Accurate Human Proportions for Precise Garment Fitting
✅ Lightweight, Durable, and Easy to Handle
✅ Adjustable Models Available for Training Versatility
✅ Smooth Surface for Easy Draping and Fabric Handling
✅ Professional Appearance for Practical and Display Use

The Wooden White Drawing Board is a durable, smooth, and stable surface designed for precision drawing, drafting, technical sketching, and artwork. Crafted from high-quality, seasoned hardwood or plywood, this board is coated with a white, non-reflective, scratch-resistant laminate that ensures smooth pencil or ink work and easy erasing without smudging.

Ideal for use in schools, colleges, ITI institutes, engineering drawing classes, architectural studios, and professional drafting environments, this drawing board provides a rigid and reliable platform for technical or creative work.

• Material: High-Quality Seasoned Plywood / Hardwood

• Surface Finish: Smooth White Laminate / Melamine Coating

• Color: White (Non-Reflective, Anti-Glare Finish)

• Sizes Available:

  • A1 / A2 / A3 / A0 Standard Sizes

  • Customized Sizes on Request

• Thickness: 12mm / 15mm / 18mm (As per requirement)

• Edges: Smoothly Finished, Rounded or Chamfered Edges for Safety

• Engineering Drawing & Drafting

• Architectural Sketching

• Art Colleges & Design Institutes

• Industrial Training Institutes (ITI)

• Schools & Educational Institutions

• Technical & Office Drawing Work

✅ Sturdy, Warp-Resistant Wooden Construction
✅ Smooth White Surface for Clear Line Work
✅ Scratch-Resistant & Easy to Clean
✅ Non-Reflective Coating for Comfort During Long Use

• Qatalitic Drawing Board Technical - Table Model with Parallel Motion
• Size : 25.5' x 35' , Material : Wood 
• Both sides laminated with 5 adjustable working angles 
• Ideal for students

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packaging

An Analog Hardness Testing Machine is a robust and precise mechanical device designed to measure the hardness of metals and alloys through established methods such as Brinell, Rockwell, or Vickers. This machine provides direct hardness readings on a dial gauge or analog scale, offering a simple and highly reliable solution for quality control and material testing in manufacturing industries, laboratories, and workshops.

Analog models are valued for their mechanical accuracy, long service life, and independence from electronic interference. They are ideal where basic, cost-effective, and highly durable hardness testing is required.

• Types Available:

  • Rockwell (HRC, HRB, etc.)

  • Brinell (HBW)

  • Vickers (HV)

• Testing Range:

  • Rockwell: HRC 20-70 / HRB 30-100

  • Brinell: 32-650 HBW

  • Vickers: 100-1000 HV

• Display: Precision Analog Dial Indicator

• Load Application: Dead Weight / Spring Mechanism (Manual or Lever-Operated)

• Load Range: 15 kgf to 3000 kgf (Depending on Type)

• Scale Accuracy: ±1% of Full Scale

• Hardness Conversion Charts: Provided (Optional)

• Steel and Iron Components

• Non-Ferrous Metals (Aluminum, Brass, etc.)

• Castings and Forgings

• Automotive Parts

• Tool & Die Manufacturing

• Quality Control Labs

• Educational Institutions for Training

✅ Durable, Mechanical Design for Long-Term Use
✅ No Electronics, Ideal for Harsh Industrial Environments
✅ Easy to Operate, Direct Readout on Analog Scale
✅ Highly Accurate and Repeatable Results
✅ Suitable for Flat and Irregular Specimens
✅ Low Maintenance with Rugged Construction

Additional Information:

• Port of Dispatch: NEW DELHI
• Delivery Time: 5

A Synchronized Motor Generator Set is an integrated system that combines a motor and a generator in a synchronized manner to provide reliable power conversion and conditioning. These sets are widely used in applications requiring stable and precise power supply, such as in laboratories, data centers, industrial environments, and research facilities.

Kalpurja is a highly reputed authorized dealer and stockist of superior quality of Electrical Electronic Test & Measuring Instruments, Electrical & Electronic Equipments and Educational Electrical Electronic Lab Training instruments. Stockist and authorized dealer of all industrial engineers products at wholesale prices. Our company is committed to offer quality products, which are manufactured with the application of latest technology and modern machines to ensure the customer satisfaction.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: box packaging

A Sewing Dexterity Test Kit is a valuable tool for evaluating and developing sewing skills in various industrial and educational settings. By providing standardized tests and evaluation criteria, it helps ensure consistent quality in sewing work and facilitates the training and certification of sewing professionals. This kit is essential for industries that rely on skilled sewing labor and for educational institutions that teach sewing and garment construction techniques.

We are a reputed trader and supplier of AC Squirrel Cage Motors with Mechanical Load, offering a wide range of models suitable for industrial, commercial, and engineering applications. These motors are widely used for mechanical load testing, conveyors, fans, pumps, compressors, and machine tools, providing robust performance, energy efficiency, and long service life.

Our offered squirrel cage induction motors are designed for continuous operation under demanding conditions, ensuring reliable torque, stable speed, and minimal maintenance. They are preferred across industries for their simple construction, ruggedness, and cost-effectiveness.

• Type: Three Phase AC Squirrel Cage Induction Motor

• Voltage: 415V AC (Standard)

• Frequency: 50 Hz / 60 Hz

• Frame Size: As per standard IEC / NEMA specifications

• Power Output: 0.5 HP to 200 HP (Custom Range Available)

• Speed: 750 / 960 / 1440 / 2880 RPM

• Efficiency: IE2 / IE3 (Energy Efficient Models Available)

• Mounting: Foot / Flange / Face Mounting Options

• Mechanical Load: Coupled with Variable Load for Testing / Industrial Operations

• Mechanical Load Testing Units

• Material Handling Systems (Conveyors, Hoists)

• Fans, Blowers, and Exhaust Systems

• Pumps and Compressors

• Lathe Machines, Milling Machines, and Other Machine Tools

• HVAC & Industrial Ventilation Systems

✅ Robust Squirrel Cage Rotor for Continuous Heavy-Duty Applications
✅ High Starting Torque & Smooth Running Performance
✅ Low Maintenance with Simple & Reliable Construction
✅ Energy-Efficient Models for Reduced Operational Cost
✅ Compatible with Mechanical Load Testing Setups
✅ Built to Withstand Harsh Industrial Conditions